Products \ Industrial electronics \ Laser marking device \ Laser marking device LZZxxxR
Laser marking device LZZxxxR
Laser marking device
Lasermarking device is designed to center reeled track material (gum, textile, plate, plastic etc.). The device generates three laser beams in the shape of parallel lines, distance of whose can be in certain intervals regulated. The middle beam is fixed, the two at sides are mobile. Distance setting of the beams is possible through the serial interface PROFIBUS DP or through the manual terminal. The types produced differ in range of beams movement. The device is attached to the machine construction by two montage consoles.
Technical parameters of the device: | |
|---|---|
| Power supply: | 24 VDC ±20 % |
| Power consumption: | max. 1,5 A |
| Accuracy of positioning: | ±0,5 mm |
| Communicating interface: | PROFIBUS DP |
| Maximal speed of movement: | 150 mm/s |
| Protection: | IP42 |
| Min. distance between the outer beams: | 70 mm |
| Max. distance between the outer beams: | according to type 400, 800, 1100 and 1600 mm |
| - protection against reversing of polarity | |
| - possibility to switch off the laser beams | |
| - attachment mode and maximal dimensions according to the picture |
Parameters of the laser beam: | |
|---|---|
| Wave-length: | 635 nm |
| Laser beam width: | 1 ÷ 1,5 mm |
| Power of the laser LED: | 3 mW |
| - laser of the class 2 according to IEC 825-1 |
Documents for download
| LZZxxxR (EN) | download |
| LZZxxxR (SK) | download |
| LZZxxxR Manual (EN) | download |
| LZZxxxR Navod (SK) | download |